Mmf-pos Standard RS-232 Connection Interface Kit Bedienungsanleitung PDF herunterladen (Seite 4)

531-8661-00 MMF Multi-Serial Interface Page 3 of 12

 Switch 1

When the indicated Switch is ON, all other specified Switches in the same column must be OFF

 JP1 when SW1-pos 8 is in the ON position, jumper JP1 must be placed in the SIG position (jumper across pins

1 and 2 of JP1).

 JP1 must be placed on the PWR position (jumper across pins 3 and 2 of JP1) when receiving power via pin 9

from a PC powered serial port.

 Switch 2

SW2 Functions only apply when the controller is set to "Smart Mode" (SW3-1 = ON)

POS

SW2

FUNCTION

ASCII Character Bit 0 (LSB)

ASCII Character Bit 1

ASCII Character Bit 2

ASCII Character Bit 3

ASCII Character Bit 4

ASCII Character Bit 5

ASCII Character Bit 6

ASCII Character Bit 7 (MSB)

POS

SW1

SW1 CONFIGURATION CONSTRAINTS

FUNCTION (when ON)

Loop DTR (pin 4) to DCD (pin 1)

OFF

Loop DTR (pin 4) to DSR (pin 6)

OFF

Loop CTS (pin 8) to RTS (pin 7)

OFF

Receive Drawer-Open data input on TXD (pin 3)

OFF

Receive Drawer-Open data input on RXD (pin 2)

OFF

Receive Drawer-Open data input on CTS (pin 8)

OFF

Send Drawer-Status output on CTS (pin 8)

OFF

Send Drawer-Status output on RI (pin 9) -see JP1



OFF

Send Drawer-Status output on DSR (pin 6)

OFF

Re-Transmit Drawer-Open data signal on TXD (pin 3)

OFF

1 2 3 4 5 6 7 8 9 ... 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Mmf-pos Standard RS-232 Connection Interface Kit Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Mmf-pos Standard RS-232 Connection Interface Kit